DJI’s most advanced technology comes together in an easy to use, all-in-one flying platform that empowers you to create the unforgettable.



When inspire 1 is in the air, is constantly updated and recorded using a high-strength, intelligent GLONASS + GPS system. This dual positioning system enables higher precision and quicker satellite acquisition, allowing you to see where the aircraft is on a live map and giving it a point to hover at when you release the controls.

Main controller

This is the "brain" of the entire system, receiving thousands of bits of data every second and translating that data into action as you fly. The Main Controller tells every part of your Inspire 1 what to do, calculates environmental conditions in real-time, and ensures that the aircraft responds to your control commands instantly.

Hover in place without gps

You can take off and land at the press of a button and keep your Inspire 1 steady indoors or when GPS satellites can’t be acquired with the new DJI Vision Positioning System.


We'll take care of your

Inspire 1


Inspire 1

Rotor design

The unique DJI "Z-Blade" design comes in all new 13 inch quick release rotors. Now with a new carbon fiber compound material to ensure excellent performance with increased stability.

Single-wire design

A single dense strand is in the aircraft because they were several strands of copper wire. All this reduces the wasted space between wires results in more copper within each motor, providing more power and less resistance. A centrifugal pump increases airflow inside the neat, tight copper windings dissipating heat much faster.

inspire 1

Curved magnets

Brushless motors pioneered by DJI are now the standard in the multirotor industry. DJI has integrated curved magnets that fit flush around the edge of each motor. Although much more difficult to produce, these magnets eliminate airflow gaps within the motor, greatly increasing efficiency.

Aerodynamic, transforming design

Carbon fiber arms give you the strength to maneuver in the air. With a full 360⁰ unobstructed view, you now have the freedom to capture shots independent of the direction you are flying.


With a Micro Four Thirds CMOS sensor with 4K image capture the Inspire 1 featuring the Zenmuse camera and gimbal system. The Inspire 1 features a retractable arm system whereby the underside of each prop motor to act as a landing pod. In-flight, the arms lift up to provide the camera an unobstructed 360-degree view, after all its better, right?. A 3-axis gimbal keeps shots steady and the camera pointed the same direction as the quadcopter banks and turns. The camera records internally to microSDHC/SDXC memory cards and can also beam a live 720p feed to a mobile device. a second controller can be added so that one operator can pilot and another can pan and tilt the camera.

This Inspire 1 bundle comes with X3 v2 and a Zenmuse Flir XT 336×256 9Hz Slow Framerate Camera. It is important to follow the user guide to ensure proper calibration before embarking on your first flight.