MATRICE 600 PRO SIMPLY PROFESSIONAL

The Matrice 600 Pro (M600 Pro) inherits everything from the M600 with improved flight performance and better loading capacity. Pre-installed arms and antennas reduce time required for setup. That's no all the great stuff of Matrice 600 Pro, the modular design of the system makes it easy to mount additional modules. The airframe is equipped with the latest DJI technologies, including the A3 Pro flight controller, Lightbridge 2 HD transmission system, Intelligent Batteries and last but not least, Battery Management system. All Zenmuse cameras and gimbals are natively compatible and full integration with third party software and hardware make the M600 Pro ideal for professional aerial photography and industrial applications.

matrice 600 pro
matrice 600 pro

AERIAL IMAGING SOLUTION

Dustproof propulsion systems simplify maintenance and active cooling motors ensure that operation is reliable for extended periods of time. The M600 Pro is natively compatible with current Zenmuse cameras and gimbals. With a maximum payload of 6kg, it effortlessly supports the Ronin-MX gimbal, DJI Focus and a range of cameras from Micro Four Thirds systems to the RED EPIC.

A3 Pro Flight Controller

The A3 Pro Flight Controller has triple modular redundancy and diagnostic algorithms that compare sensor data from three sets of GNSS units. This is not all the power of the controller, but also with additional analytical redundancies for a total of six. A new dampening system for the A3’s modules enable precise control of multi-rotor aircraft, providing accurate data for stable flight. Self-adaptive systems will automatically adjust flight parameters based on different payloads. Compatibility with D-RTK GNSS means that the A3 Pro can withstand magnetic interference, providing centimeter-level accuracy, suitable for various industrial applications.

Complete Integration

The M600 Pro is simple and easy to set up, ready to fly in a matter of minutes. Now with an optimized airframe for easier transportation but also even with folding frame arms. Under the new upper cover, the positions of GNSS modules and sensors. The M600 Pro also comes with a durable, customizable case that absorbs impact from shakes or falls, and that of course provides all-round protection when carried or transported. The airframe is compatible with DJI’s Zenmuse camera series, the Ronin-MX gimbal and DJI Focus. It effortlessly supports a payload of 6kg, meaning it can carry a range of cameras from Micro Four Thirds CSCs to the Red Epic. Adjust camera settings and use this real-time view to line up the perfect shot. The live video stream from your camera is automatically saved on your mobile device for easy preview and editing later. 

Charge Six Batteries Simultaneously

Offering improved flight performance, a more powerful battery charging system and better loading capacity; the DJI Matrice 600 Pro’s A3 Pro flight controller comes with triple modular redundancy and diagnostic algorithms that compare sensor data from three sets of GNSS units, which enhances precision control while improving overall safety. The M600 Pro charger has six charging hubs, then is enable to charge six Intelligent Batteries simultaneously. All six batteries can be fully charged in a short amount of time*, for quick and efficient preparation.
*92 minutes for TB47S and 110 minutes for TB48S.

Extended transmission range

The M600 Pro has an extended flight time and a 5km* long-range transmission. If any of its six Intelligent Batteries changed on or off, the rest will follow suit. This is possible due to a comprehensive battery management system. This system monitors every battery during flight, ensuring safe landing in the event of single battery failure. Compared to traditional non-intelligent batteries, the M600 Pro’s battery management system simplifies maintenance while enhancing security. That's why you don't have to worry about the precision in the landing proccess, because M600 do it by it self. First, Matrice made it by it self. Second, you can focus specially in the flight. Definitely matrice 600 is a well done aircraft.

*Maximum range tested in unobstructed areas free of interference and may vary depending on local regulations.

Professional HD transmission

The professional broadcasting has no worries due to the design of the DJI Lightbridge 2 wich can meet all its requirements. It offers high frame rates and of course HD live streaming. USB, mini-HDMI, 3G-SDI ports and Lightbridge 2 Ground Unit all support video output at up to 1080p/60fps. Dynamic, self-adaptive wireless data links enable long-range transmission with ultra-low latency, supporting a broadcast standard output of 720p/59.94fps and 1080i/50fps, enabling even more creative opportunities for aerial imaging.

Powerful app control

The M600 Pro supports the DJI GO app and DJI Assistant 2. Get a live HD view, status of battery and redundancy, transmission strength and even much more. DJI GO is also the control center for the camera, giving access to shutter speed, ISO, photo or video capture. The app is compatible with any Zenmuse series camera, remote focus and aperture control and X5R cameras. DJI Assistant 2 supports firmware updates and Ground Station, and comes with a built-in flight simulator. Watch a live HD video feed direct from the camera right on your screen. You can be updated about what is happening in the environment with great video definition.

DRONE REPAIR

We'll take care of your

Matrice 600 Pro

Matrice 600 pro

DJI Improves Large Drone Performance With Matrice 600 Pro

Is a six-rotor flying platform designed for professional aerial photography and industrial applications in the first place. Part of the aircraft's equipment is a dedicated DJITM A3 Pro triple-modular redundancy system and advanced intelligent flight functions, ensuring safe and stable operation at all times. Its mechanical design, with quick-release landing gear and mounted folding arms, make it easy to transport and store. With a maximum takeoff weight of 15.5 kg, the Matrice 600 Pro can meet specific needs across a range of industries. 

The A3 Pro’s three GPS modules and IMUs add triple modular redundancy to greatly reduce the risk of system failure. It's fully compatible with the DJI Onboard and Mobile SDKs, allowing developers to optimize the flying platform for specific applications.

The Matrice 600 Pro uses six Intelligent Flight Batteries and a patented battery management system. This porwerful system extends flight time and provide safe and reliable power supply because that makes it better. The standard DJI Hex Charger can charge up to six Intelligent Flight Batteries and two remote controllers simultaneously.

The Matrice 600 Pro is compatible with the DJI ZENMUSE Z30, X3, X5 series, XT gimbal and camera. Is also compatible with Zenmuse Z15 series HD gimbal, and Ronin-MX gimbal for professional aerial photography and industrial applications.

MORE THAN A DRONE

The airframe combines the features of a separate remote control with the visual appeal and ease-of-use of a smartphone/tablet. It is best operated when using the two in combination with the app onto your compatible mobile device. Connected mobile devices are most commonly used for a first-person viewing angle from your airborne drone. Of course, it is not absolutely necessary that you use them at the same time in order for the drone to fly.

The pre-installed arms and also the antennas reduce time required for setup, that's because is must important to be focus on the fly. The system’s modular design makes it easy to mount additional modules. The airframe includes the A3 Pro flight controller, Lightbridge 2 HD transmission system, Intelligent Batteries and also the Battery Management system. All Zenmuse cameras and gimbals are natively compatible and full integration with third party software and hardware.